Jaeger Superjack V-box Ii Manual

01

фев

Jaeger Superjack V-box Ii Manual

Posted: 

Detailed Superjack v-box II positioner Compatible with diseqc 1. Bangladesh national id card search. 2 receiver or any receiver Compat Superjack v-box II positioner Compatible with diseqc 1. 2 receiver or any receiver Compatible with any actuator or H-H mount Memory storage upto 60 satellite positions Drive dish up to 3. Is a high-tech enterprise which have a design, manufacture, marketing mechatronics and specializing in production the Linear Actuator. All our products have obtained the international authorized certificates such as CE,FCC,UL,CSA etc.

Jaeger Superjack V-box Ii Manual

1- • • • 2- • • • 3- • • • • • • • • • 4- • • • • • • • 5- • • • • • • 6- • • • 7- • • • • 8- • • • • • • • 9- • • • • • • • • • • • • • • 10- • • • • • • 11- • • • • • 12- OTHER PRODUCTS • • > > VBOX II DiSEqC POSITIONER Moteck V-BOX II No longer available This is an ORIGINAL Moteck brand positioner, Not a cheap imitation. • This Moteck VBoxII is used to control your actuator (motor) on your C band dish. • It takes DiSEqC 1.2 commands from your MPEG2 DVB satellite receiver and converts it into 36V pulse and sensor to store positions - can store 99 Positions.

• It can work as a stand alone positioner or it can accept DiSEqC 1.2 commands from a satellite receiver. • Controls and displays position. FEATURE: Compatible with DiSEqC 1.0 /1.2 or Any Receiver Compatible with any Reed Switch Actuator or H-H Mount 5V DC Output for Optical Sensor Actuator 3 Digit LED Display Drive Dish up to 3M 99 Satellite Positions Fine-tune EAST / WEST Buttons Optional Remote Control Available Overload Protection ( Auto-recovery ) Anti-Noise Design Remote Control Included Tech Support Forums: Specification: Model V-BOX II Input 110 VAC / 60Hz Output 36 VDC Max. Dish Diameter 3M Max. Puppy raising tips. Output Current 3.5A Max.

Power Consumption 80W Protocol DiSEqC 1.0 / 1.2 Positions Memories 99 Controlled by DiSEqC 1.2 Receiver or Included Remote Control Display 3 Digit LED Resynchronize Function YES Manual Buttons Power ON / OFF, EAST / WEST Protection Software Limit Protection Electric Overload Protection 1 Year Mfg Warranty Wiring The Actuator (wires not included with actuator): The actuator line is comprised of five stranded copper wires. • Two 12 or 14 gauge stranded wires are used to power the motor and • Two color-coded 18 or 22 gauge shielded wires connect to the sensor. These actuator wires should be connected to the appropriate terminals on the back of the receiver (or a separate actuator power supply). Like the servo motor wires, the Two shielded motor sensor wires provide pulse, and ground. The vast majority of actuator motors do not require power to be hooked to the sensor.

Look inside the actuator housing. If there are only two wires connected to the sensor, then hook up pulse and ground to their respective terminals. IF there are three wires connected to the sensor, and pulse and ground interchangeably to the other two sensor wires, then use 3 wires. The two large stranded wires connect to the large wire terminals at the actuator motor and to the motor wire 'M1' and 'M2' terminals on the back of the receiver.

Popular Posts

  • Detailed Superjack v-box II positioner Compatible with diseqc 1. Bangladesh national id card search. 2 receiver or any receiver Compat Superjack v-box II positioner Compatible with diseqc 1. 2 receiver or any receiver Compatible with any actuator or H-H mount Memory storage upto 60 satellite positions Drive dish up to 3. Is a high-tech enterprise which have a design, manufacture, marketing mechatronics and specializing in production the Linear Actuator. All our products have obtained the international authorized certificates such as CE,FCC,UL,CSA etc.

    \'Jaeger

    1- • • • 2- • • • 3- • • • • • • • • • 4- • • • • • • • 5- • • • • • • 6- • • • 7- • • • • 8- • • • • • • • 9- • • • • • • • • • • • • • • 10- • • • • • • 11- • • • • • 12- OTHER PRODUCTS • • > > VBOX II DiSEqC POSITIONER Moteck V-BOX II No longer available This is an ORIGINAL Moteck brand positioner, Not a cheap imitation. • This Moteck VBoxII is used to control your actuator (motor) on your C band dish. • It takes DiSEqC 1.2 commands from your MPEG2 DVB satellite receiver and converts it into 36V pulse and sensor to store positions - can store 99 Positions.

    • It can work as a stand alone positioner or it can accept DiSEqC 1.2 commands from a satellite receiver. • Controls and displays position. FEATURE: Compatible with DiSEqC 1.0 /1.2 or Any Receiver Compatible with any Reed Switch Actuator or H-H Mount 5V DC Output for Optical Sensor Actuator 3 Digit LED Display Drive Dish up to 3M 99 Satellite Positions Fine-tune EAST / WEST Buttons Optional Remote Control Available Overload Protection ( Auto-recovery ) Anti-Noise Design Remote Control Included Tech Support Forums: Specification: Model V-BOX II Input 110 VAC / 60Hz Output 36 VDC Max. Dish Diameter 3M Max. Puppy raising tips. Output Current 3.5A Max.

    Power Consumption 80W Protocol DiSEqC 1.0 / 1.2 Positions Memories 99 Controlled by DiSEqC 1.2 Receiver or Included Remote Control Display 3 Digit LED Resynchronize Function YES Manual Buttons Power ON / OFF, EAST / WEST Protection Software Limit Protection Electric Overload Protection 1 Year Mfg Warranty Wiring The Actuator (wires not included with actuator): The actuator line is comprised of five stranded copper wires. • Two 12 or 14 gauge stranded wires are used to power the motor and • Two color-coded 18 or 22 gauge shielded wires connect to the sensor. These actuator wires should be connected to the appropriate terminals on the back of the receiver (or a separate actuator power supply). Like the servo motor wires, the Two shielded motor sensor wires provide pulse, and ground. The vast majority of actuator motors do not require power to be hooked to the sensor.

    Look inside the actuator housing. If there are only two wires connected to the sensor, then hook up pulse and ground to their respective terminals. IF there are three wires connected to the sensor, and pulse and ground interchangeably to the other two sensor wires, then use 3 wires. The two large stranded wires connect to the large wire terminals at the actuator motor and to the motor wire \'M1\' and \'M2\' terminals on the back of the receiver.

    ...'>Jaeger Superjack V-box Ii Manual(01.02.2019)

  • Detailed Superjack v-box II positioner Compatible with diseqc 1. Bangladesh national id card search. 2 receiver or any receiver Compat Superjack v-box II positioner Compatible with diseqc 1. 2 receiver or any receiver Compatible with any actuator or H-H mount Memory storage upto 60 satellite positions Drive dish up to 3. Is a high-tech enterprise which have a design, manufacture, marketing mechatronics and specializing in production the Linear Actuator. All our products have obtained the international authorized certificates such as CE,FCC,UL,CSA etc.

    \'Jaeger

    1- • • • 2- • • • 3- • • • • • • • • • 4- • • • • • • • 5- • • • • • • 6- • • • 7- • • • • 8- • • • • • • • 9- • • • • • • • • • • • • • • 10- • • • • • • 11- • • • • • 12- OTHER PRODUCTS • • > > VBOX II DiSEqC POSITIONER Moteck V-BOX II No longer available This is an ORIGINAL Moteck brand positioner, Not a cheap imitation. • This Moteck VBoxII is used to control your actuator (motor) on your C band dish. • It takes DiSEqC 1.2 commands from your MPEG2 DVB satellite receiver and converts it into 36V pulse and sensor to store positions - can store 99 Positions.

    • It can work as a stand alone positioner or it can accept DiSEqC 1.2 commands from a satellite receiver. • Controls and displays position. FEATURE: Compatible with DiSEqC 1.0 /1.2 or Any Receiver Compatible with any Reed Switch Actuator or H-H Mount 5V DC Output for Optical Sensor Actuator 3 Digit LED Display Drive Dish up to 3M 99 Satellite Positions Fine-tune EAST / WEST Buttons Optional Remote Control Available Overload Protection ( Auto-recovery ) Anti-Noise Design Remote Control Included Tech Support Forums: Specification: Model V-BOX II Input 110 VAC / 60Hz Output 36 VDC Max. Dish Diameter 3M Max. Puppy raising tips. Output Current 3.5A Max.

    Power Consumption 80W Protocol DiSEqC 1.0 / 1.2 Positions Memories 99 Controlled by DiSEqC 1.2 Receiver or Included Remote Control Display 3 Digit LED Resynchronize Function YES Manual Buttons Power ON / OFF, EAST / WEST Protection Software Limit Protection Electric Overload Protection 1 Year Mfg Warranty Wiring The Actuator (wires not included with actuator): The actuator line is comprised of five stranded copper wires. • Two 12 or 14 gauge stranded wires are used to power the motor and • Two color-coded 18 or 22 gauge shielded wires connect to the sensor. These actuator wires should be connected to the appropriate terminals on the back of the receiver (or a separate actuator power supply). Like the servo motor wires, the Two shielded motor sensor wires provide pulse, and ground. The vast majority of actuator motors do not require power to be hooked to the sensor.

    Look inside the actuator housing. If there are only two wires connected to the sensor, then hook up pulse and ground to their respective terminals. IF there are three wires connected to the sensor, and pulse and ground interchangeably to the other two sensor wires, then use 3 wires. The two large stranded wires connect to the large wire terminals at the actuator motor and to the motor wire \'M1\' and \'M2\' terminals on the back of the receiver.

    ...'>Jaeger Superjack V-box Ii Manual(01.02.2019)