14
сен
Sorgam sun tv serial wiki. • 1 Answer SOURCE: I have a Model 792864B. Before you attempt to light the pilot light - make sure that any wall control switch or remote control for the fireplace is in the off position.
Marco Wood Burning Fireplace Manual Gutters Scratch & Dent Home, Marco Wood Burning Unit Glass Door Search Grid Page One Marco Wood Burning Fireplace Models shown alphabetically. Chimney Pipe for Gas, Wood, Pellet and Corn Products Elmira Stove BIS EPA Wood Burning Fireplace Parts Barbeques Marco Wood Fireplace Parts. INSTALLING AND OPERATING YOUR MARCO WOOD-BURNING FIREPLACE CHECK LOCAL CODES PRIOR TO INSTALLATION Builders 41 ' Fireplaces Optional Features: Glass Doors Outside Air Kit Fan Kit (Heat Circulating Models Only) Stock # 792861B 792862B 792863B 792864B THIS MANUAL PROVIDES ALL THE INSTRUCTIONS NECESSARY FOR THE BUILDER OR.
Locate the gas supply line. There should be a gas supply valve to turn on the gas supply. The valve is usually painted a different color than the supply line like blue, green or yellow. Open the valve by pivoting the handle to be parallel to the gas line, usually counter-clockwise.
When it is closed it is at a 90 degree angle from the supply line. Locate the pilot light assembly - this is the pilot light. There should also be a red or black ignitor button and a black or green valve control knob with the words 'on' 'off' and 'pilot' on it. It may be located inside a black box, mine is marked heatolator, that has a lift off top. Lift off the top of the box. Push in the valve control knob and turn it until the word 'pilot' is in line with the arrow (my arrow is red) or indicator line.
While pressing and holding in the valve control knob - it presses in about 1/4', press the red or black ignitor button repeatedly (once per second) until the pilot ignites. Once the pilot is lit, continue to hold the valve knob in for about 30 seconds and then slowly release. The pilot should remain lit.
If it remains lit, press in and turn the valve control knob to the 'on' position. The on/off wall or remote control switch should now light your fireplace. If the pilot doesn't ignite, turn off gas supply valve, wait about 5 minutes and try it again. Posted on Jan 28, 2009.
• 1 Answer SOURCE: I have a Model 792864B. Before you attempt to light the pilot light - make sure that any wall control switch or remote control for the fireplace is in the off position. Locate the gas supply line. There should be a gas supply valve to turn on the gas supply. The valve is usually painted a different color than the supply line like blue, green or yellow. Open the valve by pivoting the handle to be parallel to the gas line, usually counter-clockwise.
When it is closed it is at a 90 degree angle from the supply line. Locate the pilot light assembly - this is the pilot light. There should also be a red or black ignitor button and a black or green valve control knob with the words 'on' 'off' and 'pilot' on it. It may be located inside a black box, mine is marked heatolator, that has a lift off top. Lift off the top of the box. Push in the valve control knob and turn it until the word 'pilot' is in line with the arrow (my arrow is red) or indicator line.
While pressing and holding in the valve control knob - it presses in about 1/4', press the red or black ignitor button repeatedly (once per second) until the pilot ignites. Once the pilot is lit, continue to hold the valve knob in for about 30 seconds and then slowly release. The pilot should remain lit.
If it remains lit, press in and turn the valve control knob to the 'on' position. The on/off wall or remote control switch should now light your fireplace. If the pilot doesn't ignite, turn off gas supply valve, wait about 5 minutes and try it again. 
Posted on Jan 28, 2009.
Popular Posts
Sorgam sun tv serial wiki. • 1 Answer SOURCE: I have a Model 792864B. Before you attempt to light the pilot light - make sure that any wall control switch or remote control for the fireplace is in the off position.
Marco Wood Burning Fireplace Manual Gutters Scratch & Dent Home, Marco Wood Burning Unit Glass Door Search Grid Page One Marco Wood Burning Fireplace Models shown alphabetically. Chimney Pipe for Gas, Wood, Pellet and Corn Products Elmira Stove BIS EPA Wood Burning Fireplace Parts Barbeques Marco Wood Fireplace Parts. INSTALLING AND OPERATING YOUR MARCO WOOD-BURNING FIREPLACE CHECK LOCAL CODES PRIOR TO INSTALLATION Builders 41 \' Fireplaces Optional Features: Glass Doors Outside Air Kit Fan Kit (Heat Circulating Models Only) Stock # 792861B 792862B 792863B 792864B THIS MANUAL PROVIDES ALL THE INSTRUCTIONS NECESSARY FOR THE BUILDER OR.
Locate the gas supply line. There should be a gas supply valve to turn on the gas supply. The valve is usually painted a different color than the supply line like blue, green or yellow. Open the valve by pivoting the handle to be parallel to the gas line, usually counter-clockwise.
When it is closed it is at a 90 degree angle from the supply line. Locate the pilot light assembly - this is the pilot light. There should also be a red or black ignitor button and a black or green valve control knob with the words \'on\' 'off\' and \'pilot\' on it. It may be located inside a black box, mine is marked heatolator, that has a lift off top. Lift off the top of the box. Push in the valve control knob and turn it until the word \'pilot\' is in line with the arrow (my arrow is red) or indicator line.
While pressing and holding in the valve control knob - it presses in about 1/4\', press the red or black ignitor button repeatedly (once per second) until the pilot ignites. Once the pilot is lit, continue to hold the valve knob in for about 30 seconds and then slowly release. The pilot should remain lit.
If it remains lit, press in and turn the valve control knob to the \'on\' position. The on/off wall or remote control switch should now light your fireplace. If the pilot doesn\'t ignite, turn off gas supply valve, wait about 5 minutes and try it again. Posted on Jan 28, 2009.
• 1 Answer SOURCE: I have a Model 792864B. Before you attempt to light the pilot light - make sure that any wall control switch or remote control for the fireplace is in the off position. Locate the gas supply line. There should be a gas supply valve to turn on the gas supply. The valve is usually painted a different color than the supply line like blue, green or yellow. Open the valve by pivoting the handle to be parallel to the gas line, usually counter-clockwise.
When it is closed it is at a 90 degree angle from the supply line. Locate the pilot light assembly - this is the pilot light. There should also be a red or black ignitor button and a black or green valve control knob with the words \'on\' 'off\' and \'pilot\' on it. It may be located inside a black box, mine is marked heatolator, that has a lift off top. Lift off the top of the box. Push in the valve control knob and turn it until the word \'pilot\' is in line with the arrow (my arrow is red) or indicator line.
While pressing and holding in the valve control knob - it presses in about 1/4\', press the red or black ignitor button repeatedly (once per second) until the pilot ignites. Once the pilot is lit, continue to hold the valve knob in for about 30 seconds and then slowly release. The pilot should remain lit.
If it remains lit, press in and turn the valve control knob to the \'on\' position. The on/off wall or remote control switch should now light your fireplace. If the pilot doesn\'t ignite, turn off gas supply valve, wait about 5 minutes and try it again.
...'>Marco Fireplace Owners Manual(14.09.2018)
Posted on Jan 28, 2009.Sorgam sun tv serial wiki. • 1 Answer SOURCE: I have a Model 792864B. Before you attempt to light the pilot light - make sure that any wall control switch or remote control for the fireplace is in the off position.
Marco Wood Burning Fireplace Manual Gutters Scratch & Dent Home, Marco Wood Burning Unit Glass Door Search Grid Page One Marco Wood Burning Fireplace Models shown alphabetically. Chimney Pipe for Gas, Wood, Pellet and Corn Products Elmira Stove BIS EPA Wood Burning Fireplace Parts Barbeques Marco Wood Fireplace Parts. INSTALLING AND OPERATING YOUR MARCO WOOD-BURNING FIREPLACE CHECK LOCAL CODES PRIOR TO INSTALLATION Builders 41 \' Fireplaces Optional Features: Glass Doors Outside Air Kit Fan Kit (Heat Circulating Models Only) Stock # 792861B 792862B 792863B 792864B THIS MANUAL PROVIDES ALL THE INSTRUCTIONS NECESSARY FOR THE BUILDER OR.
Locate the gas supply line. There should be a gas supply valve to turn on the gas supply. The valve is usually painted a different color than the supply line like blue, green or yellow. Open the valve by pivoting the handle to be parallel to the gas line, usually counter-clockwise.
When it is closed it is at a 90 degree angle from the supply line. Locate the pilot light assembly - this is the pilot light. There should also be a red or black ignitor button and a black or green valve control knob with the words \'on\' 'off\' and \'pilot\' on it. It may be located inside a black box, mine is marked heatolator, that has a lift off top. Lift off the top of the box. Push in the valve control knob and turn it until the word \'pilot\' is in line with the arrow (my arrow is red) or indicator line.
While pressing and holding in the valve control knob - it presses in about 1/4\', press the red or black ignitor button repeatedly (once per second) until the pilot ignites. Once the pilot is lit, continue to hold the valve knob in for about 30 seconds and then slowly release. The pilot should remain lit.
If it remains lit, press in and turn the valve control knob to the \'on\' position. The on/off wall or remote control switch should now light your fireplace. If the pilot doesn\'t ignite, turn off gas supply valve, wait about 5 minutes and try it again. Posted on Jan 28, 2009.
• 1 Answer SOURCE: I have a Model 792864B. Before you attempt to light the pilot light - make sure that any wall control switch or remote control for the fireplace is in the off position. Locate the gas supply line. There should be a gas supply valve to turn on the gas supply. The valve is usually painted a different color than the supply line like blue, green or yellow. Open the valve by pivoting the handle to be parallel to the gas line, usually counter-clockwise.
When it is closed it is at a 90 degree angle from the supply line. Locate the pilot light assembly - this is the pilot light. There should also be a red or black ignitor button and a black or green valve control knob with the words \'on\' 'off\' and \'pilot\' on it. It may be located inside a black box, mine is marked heatolator, that has a lift off top. Lift off the top of the box. Push in the valve control knob and turn it until the word \'pilot\' is in line with the arrow (my arrow is red) or indicator line.
While pressing and holding in the valve control knob - it presses in about 1/4\', press the red or black ignitor button repeatedly (once per second) until the pilot ignites. Once the pilot is lit, continue to hold the valve knob in for about 30 seconds and then slowly release. The pilot should remain lit.
If it remains lit, press in and turn the valve control knob to the \'on\' position. The on/off wall or remote control switch should now light your fireplace. If the pilot doesn\'t ignite, turn off gas supply valve, wait about 5 minutes and try it again.
...'>Marco Fireplace Owners Manual(14.09.2018) Posted on Jan 28, 2009.